TEL 2-4822 - Traco Power TEL 2-4822 TEL 2 Series, 2 Watt DC/DC...
- Part Number:
- TEL 2-4822
- Model Number:
- TEL 2-4822
- Make:
- TRACO POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
Traco Power TEL 2-4822 TEL 2 Series, 2 Watt DC/DC Converter ±12 VDC 36 – 75 VDC (nominal 48 VDC) Simple Type: DC/DC Converter
The TEL-2 series, comprising 28 models, is a range of isolated 2-Watt converters in a very low profile DIL-16 package. Requiring only 3.25 cm2 of space on the PCB they do provide a complete DC/DC converter without need of any external components. A wide input range and a tightly regulated output voltage qualifies these great converters for many cost critical applications in industrial, and consumer electronics.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- I/O isolation 1500V
- Indefinite shortcircuit protection
- Input filter meets EN55022, class A without ext. components
- Lead free design, RoHS compliant
- Low ripple and noise
- Operating temperature range –40°C to +75°C
- Regulated output
- Ultracompact DIP-16 plastic package
- Wide 2:1 input range
Specifications
- Casing material: Non conductive FR4
- Conducted noise (input): EN 55022 level A, FCC part 15, level A
- Humidity (non condensing): 95 % rel. H max.
- Input current at full load / full load: 5 Vin models: 600 mA / 40 mA typ. | 12 Vin models: 220 mA / 20 mA typ. | 24 Vin models: 110 mA / 10 mA typ. | 48 Vin models: 55 mA / 8 mA typ.
- Input variation Vin min. to Vin max.: 0.5 % max.
- Isolation capacity - Input/Output: 250 pF max.
- Isolation resistance - Input/Output (500 VDC): >1‘000 M Ohm
- Isolation voltage - Input/Output (60 sec.): 1’500 VDC
- Load variation 25 – 100 %: Single output models: 0.75 % max. | Dual output models: 2.0 % (balanced load)
- Potting material: Epoxy, UL94V-0 - rated
- Reliability, calculated MTBF - (MIL-HDBK-217F, @ +25°C, ground benign): >1.2 Mio h
- Reverse voltage protection: 1.0 A max.
- Ripple and noise (20 MHz Bandwidth): 50 mVpk-pk max
- Short Circuit Protection: Indefinite, automatic recovery
- Soldering temperature: Max. 265°C / 10 sec.
- Start-up voltage / under voltage shut down: 5 Vin models: 4 VDC / 3.5 VDC typ. | 12 Vin models: 7 VDC / 6.5 VDC typ. | 24 Vin models: 12 VDC / 11 VDC typ. | 48 Vin models: 24 VDC / 22 VDC typ.
- Surge voltage (100 msec. max.): 5 Vin models: 11 V max. | 12 Vin models: 25 V max. | 24 Vin models: 50 V max. | 48 Vin models: 100 V max.
- Temperature Coefficient: ±0.02 %/K
- Temperature Ranges: Operating –40°C to +75°C (no derating) | Storage –55°C to +125°C
- Voltage set accuracy: ±2 % max.
- Weight: 5.1 g (0.17oz)
Applications
- None Available
Aliases
- None Available
